Laboratory

Investigate effects of vibration and dynamic loading for soil and unbound granular materials

Designed to handle saturation, consolidation and permeation of a triaxial test

Use with granular soils to determine the coefficient of permeability via falling-head method for laminar flow of water

Use constant head method to determine coefficient of permeability for laminar flow of water through granular soils

Heavy duty design and precise stepper-motor control provides a stable platform for institutions to commercial laboratories and construction projects

Useful for soils with free-draining properties through vibratory compaction. Apparatus determine the relative density of cohesionless soils when conventional compaction testing are not satisfactory

Piezoelectric sensors are the most sensitive strain guage technologies that do not require any power to continuously monitor environment

For use with relative density mold set or other processes requiring vibratory compaction

Coupled with automatic controllers to test cylinders, cubes and beams

Humboldt mixer has a positive gear drive and planetary mixing action to deliver positive results

For mixing material samples. Operates on the principle of planetary action where the beater reaches every part of a batch, rotating on its axis in opposite directions as it moves around the bowl

Grinds 3 concrete specimen end surfaces at one time automatically. It is equipped with specimen feeding speed adjustment function and timer function

This machine grinds 2 concrete specimen end surfaces at one time automatically

The DTS-30 Dynamic Testing System is a servo-hydraulic testing machine utilizing digital control of a high performance servo valve to provide accurate loading wave shapes up to 100 Hz

The only compactor capable of fabricating specimens for all of the following mechanistic-empirical performance tests: Dynamic Modulus, Repeated Load Permanent Deformation, Flexural Fatigue, Low Temperature Creep and Strength

The APS is capable of cutting prismatic specimens up to 200mm high and a cutting length up to 500mm and cylindrical specimens up to 150 mm diameter

Combines all the processes associated with bitumen extraction and recovery

Automated Core Drill (ACD) for fast, accurate cutting of cores from cylinders, prisms and slabs

The H-1068X is a three-speed machine designed for standard and force ductility tests.
Ductility of formed asphalt/cement or semi-solid bitumen is determined by measuring the distance of elongation before reaching the breaking point of a briquette sample, which is pulled apart at a specific speed and temperature.

The H-1068B is a three-speed machine designed for Standard and Force Ductility tests.
The machine builds on the H-1068X machine and adds a circulating temperature-control unit.

Fully electro-mechanical system, that does not require any air source (compressor) or hydraulic pressure

Used to simulate and reproduce the real compaction conditions under actual road paving operations, hence determining the compaction properties of the asphalt

Perform wet or dry test with both wheels or run one wheel under dry and one wheel under wet condition simultaneously during a single test

Basic test set for evaluating stability and plastic flow (Marshall tests) of bituminous paving mixtures. Includes all the basic testing equipment for performing these tests

The Thermal Stress Restrained Specimen Test (TSRST) is used to determine the low temperature cracking susceptibility of asphalt concrete